Mining Power Supply

You are here

Amp1975l2 1975 Watt Cryptocurrency Mining Power Supply

AMP1975L2 1975 Watt Cryptocurrency Mining Power Supply

AMP1975L2 1975 Watt Cryptocurrency Mining Power Supply
   AMP1975L2 1975 Watt Cryptocurrency Mining Power Supply

High Efficiency 1975 Watt Server PSU for Cryptocurrency Mining No more flimsy breakout boards! We are experienced bitcoin miners/engineers who offer you power systems we know to work well in actual use. Reliability : Our wiring and PSU choices have proved themselves in 24/7/365 harsh condition operations at 100% duty cycle. Ease of use : No screwing around with din terminals and wire strippers.

Just plug it and turn it on! Value : When you add it all up, we come ahead of any breakout board or PC ATX clone (and way ahead of Bitmain's own power supplies).

And now, onward with the technical specifications: Power Supply Specifications. Max power output: 1975 Watts. Will power any large ASIC miner or GPU rig.

Will power x2 (TWO) L3+/A4 litecoin miners. Compact Cube Form Factor with High Airflow.

Universal C13 "computer/monitor" power socket. 200-240V on 110V, the PSU will be limited to 930 Watts for safety reasons - do not mine on 110V! 2x universal Amity Labs harness (x20 PCIe connectors total).

Optional x3 harness build available upon request (x30 PCIe connectors total). Note: You'll see some vendors labeling similar PSUs as 94% Platinum Efficiency. Universal Amity Labs 10-connector PCI-e harness. Designed to connect to any Bitmain Antminer (and other brands such as Avalon). Ten (10x) 16 AWG braided copper 6-pin PCI-E Molex connectors, each rated to 240 Watt / 20 Amps at 80 degrees C. 30 in (75 cm) DC bus implemented with 200C silicone heavy gauge wiring, rated to 1200 Watts / 100 amps. Wiring soldered to the power terminals (minimizes electrical and thermal resistance). All energized contacts fully insulated and protected against wear, tear, and heat with high-strength dielectric epoxy shield. Technical Notes: There is a reason why you'll not see a single breakout board or PC ATX clone in our data centers! Modern bitcoin miners require 100 amps of current at 100% duty cycle.

The PCB of most breakout boards does not have enough copper planes to carry such currents. The result is overheating, delamination, and equipment-destroying burnout. Breakout boards have all their hot points exposed. Drop a coin, a screwdriver...
Etc - and watch what happens. A good server PSU will outlast the breakout board and pretty much anything else in normal use.
An interchangeable connector is moot. In contrast, our design optimizes heat management, hardiness, and insulation.

We solder the conductors to the power terminals, providing for absolutely minimal resistance and optimal heat conduction/dissipation. The solid contact also protects against accidental disconnects, contact sparks, and interface oxidation. We insulate every hot point with hard electrical epoxy and heavy-duty shrink wrap to prevent accidental shorts and increase hardiness.

We use proper wiring gauge and insulation. We use quality PCI-e connectors with proper crimping. Our PSUs ready to plug and go.

You will not waste your time screwing around with DIN terminals or spade connectors. Because this is a custom modification of an existing device, the original FCC/UL/OHSA... Etc PSU certifications are not applicable, and no safety guarantee is made.

The item "AMP1975L2 1975 Watt Cryptocurrency Mining Power Supply" is in sale since Saturday, May 12, 2018. This item is in the category "Coins & Paper Money\Virtual Currency\Miners". The seller is "amitylabs" and is located in The Dalles, Oregon.

This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, South africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Norway, Saudi arabia, United arab emirates, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Model: AMP1975L2
  • Compatible Currency: Bitcoin
  • Power Use (W): 1975
  • Brand: Amity Labs
  • Mining Hardware: ASIC
  • Type: ASIC
  • Hash Algorithm: Blake-256

AMP1975L2 1975 Watt Cryptocurrency Mining Power Supply
   AMP1975L2 1975 Watt Cryptocurrency Mining Power Supply