Mining Power Supply

You are here

1600w Platinum Apw3 Mining Psu Power Supply For Antminer Miner S9 S7 L3+ D3

1600W Platinum APW3 Mining PSU Power Supply For Antminer Miner S9 S7 L3+ D3

1600W Platinum APW3 Mining PSU Power Supply For Antminer Miner S9 S7 L3+ D3



1600W Platinum APW3 Mining PSU Power Supply For Antminer Miner S9 S7 L3+ D3

1600W Platinum APW3 Mining PSU Power Supply For Antminer Miner S9 S7 L3+ D3


1600W Platinum APW3 Mining PSU Power Supply For Antminer Miner S9 S7 L3+ D3



1600W Platinum APW3 Mining PSU Power Supply For Antminer Miner S9 S7 L3+ D3


1600W Platinum APW3 Mining PSU Power Supply For Antminer Miner S9 S7 L3+ D3
1600W Platinum APW3 Mining PSU Power Supply For Antminer Miner S9 S7 L3+ D3

1600W Platinum APW3 Mining PSU Power Supply For Antminer Miner S9 S7 L3+ D3
1600W Platinum APW3 Mining PSU Power Supply For Antminer Miner S9 S7 L3+ D3

1600W Platinum APW3 Mining PSU Power Supply For Antminer Miner S9 S7 L3+ D3



1600W Platinum APW3 Mining PSU Power Supply For Antminer Miner S9 S7 L3+ D3   
1600W Platinum APW3 Mining PSU Power Supply For Antminer Miner S9 S7 L3+ D3


1600W Platinum APW3 Mining Power Supply For Antminer Miner S9 S7 L3+ D3 top. NoteThe Voltage Range is AC 176264Vif the Voltage in Your Area is 110V You Will Need a Power Inverter to Make it Work. Model:1600W Size(LWH): 25.5 x 9 x 4.5 cm Cable Length: 39 cm Connectors: 6 PIN X 10 Pcs Number of Interfaces:10 Fit For: S9(12.5T/13T/13.5T) S7 L3+D3 APW3 Ant Series Mining Machine. Voltage Range: AC 176264 V Input Rated Voltage: AC 200240 V Starting Inrush Current: =80 A Maximum Input Current: =10 A Efficiency: =92%. Output Rated Voltage:DC 12.25 V Load Regulation: =±2% Linear Regulation: =±1% Rated Output Power: 1600W(Max) Output Current: 0130 A Output Ripple And Noise: =180 mVp-p Drive And Shut Down Overshoot Range: =±5% Rise Time: =100 ms230 V rated load test Boot Time: =3 S230 V rated voltage test Hold Up Time: =10 mS230 V rated voltage test. Input Under-voltage Protection Point: =180 V Input Under-voltage Recovery Point: =185 V Can automatic recovery, the backlash is not less than 5V Input Over-current Protection: Yes (The over-current point is between 130160A) Output Short-circuit Protection: Yes (Recovery after removal of short circuit) Input Over Temperature Protection: Yes When the temperature switch is higher than 100 degrees, protect, turn off the 12V output, and the temperature can be restored automatically below 65 degrees centigrade.
Full Load Typical value is 25? Operating Humidity: 595% Frost-free Storage Humidity: 095% Frost-free MTBF: 50000 H Typical value is 25? Altitude: = 5000 m (Normal Work) Heat Dissipation Mode: Air Blast Cooling. 1 x Mining Power Supply. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.

Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. The item "1600W Platinum APW3 Mining PSU Power Supply For Antminer Miner S9 S7 L3+ D3" is in sale since Monday, April 20, 2020. This item is in the category "Coins & Paper Money\Virtual Currency\Miners". The seller is "bestcollection999" and is located in Rowland Heights, California.


This item can be shipped to United States.

  • Brand: Unbranded
  • MPN: Does Not Apply
  • Model: 1600W
  • Size(L*W*H): 25.5 x 9 x 4.5 cm
  • Cable Length: 39 cm
  • Connectors: 6 PIN X 10 Pcs
  • Number of Interfaces: 10
  • Fit For: S9(12.5T/13T/13.5T) S7 L3+D3 APW3 Ant Series Minin
  • shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii undef



1600W Platinum APW3 Mining PSU Power Supply For Antminer Miner S9 S7 L3+ D3   
1600W Platinum APW3 Mining PSU Power Supply For Antminer Miner S9 S7 L3+ D3