Mining Power Supply

You are here

1600w Platinum Antminer Apw3 Mining Power Supply For Antminer Miner S9 S7 Dossy

1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy

1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy


1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy



1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy

1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy

1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy

1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy

1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy

1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy


1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy
1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy



1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy


1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy    1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy


NoteThe Voltage Range is AC 176264Vif the Voltage in Your Area is 110V You Will Need a Power Inverter to Make it Work. Size(LWH): 25.5 x 9 x 4.5 cm. Connectors: 6 PIN X 10 Pcs. Fit For: S9(12.5T/13T/13.5T) S7 L3+D3 APW3 Ant Series Mining Machine. Voltage Range: AC 176264 V. Input Rated Voltage: AC 200240 V. Starting Inrush Current: 80 A. Maximum Input Current: 10 A. Output Rated Voltage:DC 12.25 V. Rated Output Power: 1600W(Max).
Output Ripple And Noise: 180 mVp-p. Drive And Shut Down Overshoot Range: ±5%. Rise Time: 100 ms230 V rated load test. Boot Time: 3 S230 V rated voltage test. Hold Up Time: 10 mS230 V rated voltage test. Input Under-voltage Protection Point: 180 V. Input Under-voltage Recovery Point: 185 V.

Can automatic recovery, the backlash is not less than 5V. (The over-current point is between 130160A). (Recovery after removal of short circuit).

Input Over Temperature Protection: Yes. When the temperature switch is higher than 100 degrees, protect, turn off the 12V output, and the temperature can be restored automatically below 65 degrees centigrade. Operating Temperature: -40+50 Full Load (Typical value is 25). Storage Temperature: -40+85 (Typical value is 25). MTBF: 50000 H (Typical value is 25).

Altitude: 5000 m (Normal Work). Heat Dissipation Mode: Air Blast Cooling. 1 x Mining Power Supply. Manual measuring, please allow 1 2 mm error, thank you. It should take up to 2-5 days for your order to arrive, We have two Stores in USA, one loacte in CA, anther one is in KY. We are happy to answer any questions you may have.

We promise to reply within 12 hours, with the exception of weekend and holiday inquires which may take up to 72 hours for a response. The item "1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy" is in sale since Monday, February 5, 2018. This item is in the category "Coins & Paper Money\Virtual Currency\Miners". The seller is "cypshop2013" and is located in Shanghai. This item can be shipped worldwide.
  • Power Use (W): 1600W
  • MPN: Does not apply
  • Brand: Unbranded/Generic
  • Size(L*W*H): 25.5 x 9 x 4.5 cm
  • Cable Length: 39 cm
  • Connectors: 6 PIN X 10 Pcs
  • Number of Interfaces: 10
  • Voltage Range: AC 176~264 V
  • Input Rated Voltage: AC 200~240 V



1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy    1600W Platinum Antminer APW3 Mining Power Supply For Antminer Miner S9 S7 Dossy